Disk continuous dryer/drying machinery

specifications

1.PLG Series Continuous Plate Dryer machinery
2.Model:PLG
3.Usage:drying material in pieces,tapes and particles shape

PLG Series Continuous Plate Dryer

Trade manager:cn1510689227

Product description:

PLG Series Continuous Plate Dryer is high efficient drying equipment.Its unique structure and worldprinciple bring the features of high heat efficiency,low Enerable consumption,small space occupancy,simple configuration,easy operation and good operating environment.

It is widely applied in the industry of chemical,pharmaceutical,pesticides,foodstuff,fodder,agriculture and subsidiary products.Now there are three big categories,including normal pressure,enclosed able and LD able;four models,including 1200,1500,2200 and 2500;three machinery materials,A(carbon steel),B(stainless steel for contacting parts) and C(base on B with stainless steel for steam pipes,main shaft ans support and stainless linings for cylinder body and top cover).According to the drying area of 4-180m2,hundreds of models are provided in this series.Auxiliary devices are available to meet various requirements.

Main Principle:

Wet materials are fed continuous to the top drying layer in the dryer.They will be turned and stirred constantly by hLDs when the hLD’s arm rotates.The material flows through the surface of the drying plate along the exponential helical line.On the small drying plate the material will be moved to its exterior eLDe and drop down to the exterior eLDe of the large drying plate underneath,and then will be moved inward and drop down from its central hole to the small drying plate on the next layer.Both small and large drying plates are arranged alternay so as material can go through the whole dryer constantly.The heating medium could be saturated steam,hot water or oil will be led into hollow drying plates from one end to the other end of the dryer.The dried product will drop from the last layer of the drying plate to the bottom layer of the smell body,and will be moved by hLDs to the discharge port.The moisture exhausts from material and will be removed from the moisture discharge port on the top cover,or pumped out by the LD pump on the top cover for LD LLDe plate dryer.The dried product discharge from the bottom later can be packed directly.The drying Capacity can be raised up if equipped with supplementary devices,such as finned heater,condenser for solvent recovery,bag dust fiLDer,return and mix mechanism for dried materials and suction fan,etc.Solvent in those paste and heat sensitive materials can be easily recycled and decomposition and reaction can be also carried out.

PLG Series Continuous Plate Dryer

Feature:

1.Easy control,wide application

(1).Through adjusting the thickness of materials layer,rotating speed of main shaft,the number of hLD’s arm,hLD’s model and size,the best drying process can be set.

(2)Each layer of drying plate can be fed with hot or cold medium individually to heat or cold materials and make temperature control accurate and easy.

(3)Material’s residence time can be adjusted accu.

(4)Single flowing direction of materials without return flowing and mixing,uniform drying and stable quality,no remixing is required.

2.Easy and simple operation

(1) Easy to switch on and off

(2) After material feeding stops,hLDs can quickly discharge material out of the dryer.

(3) Through a large viewing lens,detailed cleaning and check up can be done inside of the machinery.

3.Low Enerable consumption

(1)Thin Layer of material,low speed of main shaft,small power and Enerable required for conveying system of material.

(2)Dry by conducting heat so it has high heating efficiency and low Enerable consumption.

4.Good operation environment,solvent can be recovery and powder discharging meets the emission regulation.

(1)Normal pressure LLDe:As air flow keeps low speed inside the equipment and moisture density is much higher in upper part that lower part,dust is not able to float up.Therefore,no dust powder mixes with exhausted air discharge from the outlet at the top.

(2)Closed LLDe:Equipment with solvent recovery device that can recycle organic solvent easily from moist-carrier gas in closed circulation for those subject to burning,explosion and oxidation,and poisonous materials in order for safe operation.Especially suitable for drying of flammable,explosive and poisonous material.

(3)LD LLDe:This model is particularly suitable for drying heat sensitive material since the drying process is under the LD state.

5.Easy installation and small space occupancy.

(1)The machinery is vered in an integral,it is easy to install by hoist only.

(2)Due to the multi-layer desity,the drying Capacity is large with a small space occupancy.

LDec	Diameter(mm)	high(mm)	area of dry(m2)	Power(kw)
1200/4	0	2600	3.3	1.1
1200/6	3028	4.9
1200/8	3448	6.6	1.5
1200/10	38	8.2
1200/12	4288	9.9
1500/6	2100	3022	8.0	2.2
1500/8	3442	10.7
1500/10	32	13.4
1500/12	4282	16.1	3.0
1500/14	4702	18.8
1500/16	5122	21.5
2200/6	2900	3262	18.5	3.0
2200/8	3682	24.6
2200/10	4102	30.8
2200/12	4522	36.9	4.0
2200/14	4942	43.1
2200/16	5362	49.3	5.5
2200/18	2900	5782	55.4
2200/20	6202	61.6
2200/22	6622	67.7	7.5
2200/24	7042	73.9
2200/26	7462	80.0
3000/8	3800	4050	48	11
3000/10	4650	60
3000/12	5250	72
3000/14	5850	84
3000/16	6450	96
3000/18	7050	108	13
3000/20	7650	120
3000/22	8250	132
3000/24	8850	144
3000/26	9450	156	15
3000/28	10050
3000/30	10650	180