PID controlled high temperature vacuum tubular oven in Shanghai
VTF series vacuum tube furnace use high pure alumina or quartz tube as furnace tube. Working temperature is from 800℃ to 1600℃. Precise and advanced auto temperature controller, high temperature accuracy, easy operation, excellent heat-insulation effect, symmetrical temperature uniform , VTF tube furnace are widely used in the labs of university and Research Institutions, also used in factory for production.
1. Product Specification :
Type |
QSH-VTF-1200T |
QSH-VTF-1400T |
QSH-VTF-1700T |
Max temperature |
1200℃ |
1400℃ |
1700℃ |
working temperature |
1100℃ |
1300℃ |
1600℃ |
Heating rate |
0-20℃/min |
||
Temperature accuracy |
±1℃ |
||
Temperature control |
51segments programmable and PID auto control |
||
Furnace chamber |
Alumina Ceramic fiber board |
||
Furnace structure |
Double shell with fan cooling |
||
Thermocouple |
K Type |
S Type |
B Type |
|
Heating elements |
Fe-Cr-Al-Mo wire |
SiC heater |
MoSi2 heater |
Rated voltage |
220V 50Hz Single-phase / 380V 50Hz 3 phase |
||
2. Temperature’s profile for your reference as below.( for example: 6 segments)
3.Heating elements
Working temperature |
Product Pictures |
Heating elements |
Characteristics |
W T≤1200C |
|
Fe-Cr-Al-Mo wire |
Compared with the ordinary iron chromium aluminum wire resistance, higher temperature and more durable |
W T≤1400C |
 |
SiC heater |
Using high temperature, anti-oxidation, corrosion resistance, long life, small deformation, easy installation and maintenance. |
W T≤1750C |
|
MoSi2 heater |
Suitable for ultra high temperature heating, long service life, high calorific value and economic price |
4. Trouble shooting for typical Problems
Problems |
Reason |
Solution |
|
Open Power Lock, no power indication |
Fuse (4A) in control panel is broken |
Check control panel, and replace fuse |
|
Green Power indictor is off, but Red open circuit indicator is On |
Fuse ( 50A) in main power circuit is broken |
Open the cover of front panel and replace the fuse |
|
No current shows in meter , but has Max. Voltage |
Heating element broken |
Find broken heating rod, and replace it |
|
Controller display panel SV shows“ OraL” |
Thermal Couples broken |
Replace Thermal couples ( B type ) |
|
Controller display panel SV shows“ HI AL” |
Furnace temperature > 1700C, Protection from Alarm |
Cool furnace down, and find reason why temperature is so high ( program setting may be wrong) |
|
Power and heating element are OK, but furnace can’t be controlled by program. |
Controller or related circuit may be damaged |
Heck controller. |
|
Program running, but furnace can not be heated, or real temperature is far behind the setting value |
oPL or oPH value is too low due to local voltage lower or frenquency different |
Incraese “oPL” and “oPH” value till current meter shows “ 120 A – 140A”, and program runs smoothly |
During heating below 300C, the temperature value ( PV) is not stable, and doesn’t match with setting program (SV) |
It is normal because the furnace comes with a high temperature thermocouple, which is not sensitive at temperature below 300C |
Don’t worry. Let the furnace heat to 300C, then thermocouple will functionstably with program. If the PV valueat 300C is still less than that of SV, youmay need to increase OPL value a little. |
5 .Payment Terms:
We accept Payment: L/C.T T
Price terms: FOB China
6. Transport way:
By sea, we have good forwarders, super service and price ! Especially, it is free to ship by
sea sometimes!
7. Other services:
We can make and design furnaces according to your drawings or requirements.
Our engineers will provide you with the most top quality high temperature laboratory furnaces.
8.Standard or stock size :
Standard type |
QSH-VTF-1200T |
QSH-VTF-1400T |
QSH-VTF-1600T |
Hot zone Tube size |
Φ40×300mm Φ40×450mm Φ60×300mm Φ60×450mm Φ80×300mm Φ80×450mm Φ100×300mm Φ100×450mm Φ120×300mm Φ120×450mm |
||
Note:Special furnace size is customizable
FAQ:
Q1: Are you a manufacturer or a trading company?
We are a manufacturer in China and have been in this line for more than 10 years.
Q2: What is the essential details for a quotation?
You should provide us the furnace type, the chamber size, the max temperature and the vacuum degree! We can make sure which one is suitable for you.
Q3: Can we customize the furnace according to our requirement or drawings?
Yes, of course, we have our own R&D Department, we are sure we can make it for you.
Q4: How can I get a quotation?
You can contact us online or send emails to us directly.
Q5: How long it will take to get the products?
Normally it will take 8-20 working days.
If you are tired of those Chinese bad furnaces and want to buy high quality furnaces in China
Just stop searching !
we are your best choice !
we offer you quality furnace with competitive price !
Better quality, Better service!
Copyright © 2017 - 2024BOYAL PTE.LTD. All Rights Reserved
English
