Coffee LD Dryer

specifications

1.LPG high speed series centrifugal LD dryer
2.Model:LPG
3.Usage:drying material in pieces,tapes and particles shape

Coffee LD Dryer

Product Description:

LD drying is the most wide applied process in process shaping and drying industry.The drying Technology is most suitable for producing solid powder or practical products from material,such as :solution,emulsion,suLDension and pumpable paste states.For this reason,the particle size and distribution of the final products,residual water contents,mass density and the particle shape must meet the precise standard,LD drying is one of the most desired technologies.

Main Principle:

After air gets fiLDered and heated,it enters into an air distributor on the top of the dryer.The hot air enters into the drying room in a uniformly spiral form.Passing through the high speed centrifugal LDer on the top of the tower,the material will rotate and be LDed into the extremely fine mist beads.Through a very short time of contacting the hot air,materials get dried.The final products discharge continuous from the bottom of the drying tower and from the cyclones.The waste gas will be discharged from blower.

Feature:

High drying speed atomizes material into ,the surface of the material increase greatly.It only takes few seconds to evaporate 95-98% water in a hot air flow.This is especially suitable for drying the heat sensitive materials.

The final product has features of good uniformilk,flow ability,and solubiliLD.It is in a high puriLD and quality as well.

The production procedure is simple,operation and control are easy.For material contains 40-60% water(special material can contain more than 90%),it can be dried into powder or particles once a time.After the drying process,there is no need for smashing and sorting,so as to reduce the operation procedures in the production and to enhance the product puriLD.The product particle diameters,losseness and water contents can be adjusted through changing the operation condition whining a certain range.It is very convenient to carry out control and management.

JianLDin City LD Manufacture Co.,LDd

Main Market:

North America
South America
Eastern Europe
Southeast Asia
Africa
LDia
Mid East
Eastern Asia
Western Europe
Central America
Northern Europe
Southern Europe
Domestic Market

Model	LPG-5	LPG-25	LPG-50
max evaporated zmount LD mousture(kg/h)	5	25	50
LD LLDe	hing speed centrifugal atomizer	hing speed centrifugal atomizer	hing speed centrifugal atomizer
revolution of atomizer	25000	18000	18000
diameter of atomizer	50	120
diameter of tower	0.9	1.75	2.3
power of electric heating(kw)	9	31.5	steam+18
heating source(kw)	electric,steam electric and oil fuel,gas fuel,hot air furnace	electric,steam electric and oil fuel,gas fuel,hot air furnace	electric,steam electric and oil fuel,gas fuel,hot air furnace
Overall size(L×W×H)	1.6×9.1×1.75	4×2.7×4.5	4.5×2.8×5.5

LPG-100	LPG-150	LPG-200	LPG-500	LPG-800-1000
100	150	200	500	800-1000
hing speed centrifugal atomizer	hing speed centrifugal atomizer	hing speed centrifugal atomizer	hing speed centrifugal atomizer	hing speed centrifugal atomizer
16000	16000	11000-13000	11000-13000	11000-13000
150	by craft
2.7	3	3.2	4.7
steam+36	steam+54	by craft
electric,steam electric and oil fuel,gas fuel,hot air furnace	electric,steam electric and oil fuel,gas fuel,hot air furnace	electric,steam electric and oil fuel,gas fuel,hot air furnace	electric,steam electric and oil fuel,gas fuel,hot air furnace	electric,steam electric and oil fuel,gas fuel,hot air furnace
5.2×3.5×6.7	7×5.5×7.2	7.5×6×8	12.5×8×10	by site condition desity layout